Waterway 210-6080 Deluxe Poly Jet Insert
Part Number: 210-6080
Description
A fixed-directional, deluxe style poly jet insert designed for gunite or plaster spa and pool installations. Features a scalloped face design and directional nozzle to deliver targeted flow and a refined look.
Compatibility & Fitment
- Fits 3½″ diameter wall openings when used with compatible screw-in housings.
- Ideal for gunite and concrete spa or pool walls where retrofitting or replacing internal jet inserts is required.
- Replace when the existing insert is cracked, worn, leaking, or no longer maintains a seal or flow standards.
Features & Specifications
- Face diameter: approx. 3¾″
- Length: approx. 3¾″ from face to thread end
- Thread size: 1½″ outside diameter at the opposite end from the face for screw-in installation
- Style: fixed directional scalloped face for targeted water flow
- Material: high-quality durable poly-resin glass-reinforced for pool/spa chemical and thermal resistance
Installation Notes
Turn off pump and isolate circulation circuit. Remove the old jet insert by unscrewing the housing and extract the internal insert. Clean the threads and wall body recess. Apply appropriate thread sealant if required and screw the new 210-6080 insert until flush with the wall surface. Restore circulation and verify proper flow and water tightness at the wall fitting.
Maintenance Tip
Inspect annually or any time you drain or service the spa/pool. Replace the insert if you observe degraded flow, visible cracking, or water leaking behind the trim ring. Properly installed jet inserts maintain performance and aesthetic integrity of gunite spa installations.
