PVC 435-015 Female Adapter – Slip × FPT – Schedule 40
Part Number: 435-015
Description
A white Schedule 40 PVC female adapter with a socket (slip) connection on one end and a female pipe thread (FPT) connection on the other. Designed to transition from PVC pipe to threaded pipe end while maintaining standard dimensions and performance.
Compatibility & Fitment
- Fits 1½″ nominal Schedule 40 PVC pipe on the slip side.
- Connects to 1½″ male NPT threaded pipe on the FPT side.
- Commonly used when converting a standard PVC run to a threaded component, or replacing a worn adapter in pool, spa or general plumbing installations.
Features & Specifications
- Material: Type-1 PVC engineered for cold water use and moderate temperature conditions.
- Schedule: 40, standard wall thickness for most above-ground and in-ground pool plumbing systems.
- Connection Style: Slip (socket) × FPT (female pipe thread).
- Nominal Size: 1½″.
- Maximum Service Temperature: Up to approx. 140 °F in continuous service.
Installation Notes
Ensure the pipe ends are clean, cut square and deburred. Apply appropriate PVC primer and solvent cement to the slip end, push in fully, and allow proper cure time. On the threaded side, apply PTFE thread sealant or Teflon tape, thread onto the male pipe, and tighten securely. After installation, restore system pressure and check for leaks before full operation.
Maintenance Tip
Inspect the adapter regularly for cracks, fading, or material degradation. Replace if any visible damage, leakage or loose connections are found to maintain plumbing integrity and prevent system failure.
