PVC 417-015 45° Elbow – 1-1/2″ Schedule 40 Socket x Socket
Part Number: 417-015
Description
A Standard Schedule 40 white PVC 45 degree elbow fitting designed with dual socket (slip) ends for use in cold-water, pool, spa or general plumbing systems.
Compatibility & Fitment
- Fits 1½″ nominal size PVC Schedule 40 pipe with socket ends.
- Use when the existing 45° elbow is cracked, leaking, or being replaced during piping layout modifications.
- Direct drop-in replacement for installations specifying part number 417-015.
Features & Specifications
- Nominal size: 1½″.
- Angle: 45° elbow.
- Connection ends: socket/slip × socket/slip.
- Schedule: 40 (Standard wall thickness).
- Material: Type I, cell-classification 12454-B PVC, white finish.
- Maximum continuous service temperature: approx. 140 °F (60 °C).
- Standards: Conforms to ASTM D1784 / D2466 / NSF for potable water service.
Installation Notes
Turn off circulation and relieve system pressure if applicable. Cut or prepare both pipe ends clean and square. Apply appropriate PVC primer and solvent cement to both the pipe end and the inside of each socket. Insert pipe fully and hold until bonding sets. After cure time, restore system flow and inspect the joint for leaks before full service.
Maintenance Tip
Inspect installation annually for signs of cracking, discoloration, or solvent-weld seal failure. Replace the fitting if any defects or leaks are observed to maintain plumbing integrity and system safety.
