Olympic Pox-O-Fill Epoxy Putty (Quart) – Part 962QT
Part Number: 962QT
Description
A premium two-component epoxy putty formulated to repair and permanently patch large cracks, holes, pits and spalls in pool concrete, decks and plaster. Sets stronger than concrete and can be applied underwater.
Compatibility & Fitment
- Installed in concrete pool surfaces, decks and equipment pads where cracks, chips or erosion are present.
- Use when pool plaster shows spalled areas, concrete deck has large cracks, or when re-anchoring diving boards, ladders or fixtures.
- Suitable for above-ground or in-ground pool and deck concrete repairs, even underwater applications.
Features & Specifications
- Volume: 1 quart from a two-part system (base + catalyst).
- Color: Gray (matching concrete tone after cure) and accepts paint or deck coating.
- Moldable putty consistency – can be troweled, molded or spackled into repairs.
- True underwater cure capability – can be applied in submerged conditions.
- High adhesion strength – creates a permanent bond stronger than original concrete.
Installation Notes
Clean repair area thoroughly of loose debris, dust or standing water (if above water). Mix the base and catalyst per manufacturer instructions until uniform color. Apply product into the repair area, slightly overfill any undercut (about 10% greater volume if underwater). Sculpt or smooth surface with trowel or putty knife. Allow to cure; if underwater, hold in place for about 10 minutes until self-supporting. Once cured, surface can be painted or finished as desired.
Maintenance Tip
Inspect repaired areas annually for signs of cracking, separation or failure. If joint movement or new cracking appears, re-repair immediately to prevent water intrusion. Store any remaining product sealed and protected from moisture or extreme temperatures.
