{"product_id":"geckoaquaflowetendfor25hpflomasterxp2epump91041825000ali91041825000","title":"Gecko Aqua-Flo Wet End for 2.5HP Flo-Master XP2E Pump | 91041825-000","description":"\u003cdiv\u003e\n\u003ch2\u003eGecko 91041825-000 – Wet End Assembly (2.5 HP, 48 Frame)\u003c\/h2\u003e\n\u003ch3\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThis wet end assembly is a direct replacement part for the Gecko\/Aqua-Flo Flo-Master XP2\/XP2E pump series. It includes the volute housing, impeller, wear ring, suction cover, seal assembly, drain plug, O-rings and screws—everything needed to refresh the pump hydraulics without replacing the whole unit.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for 2.5 HP continuous duty applications with 48-frame motor mounts.\u003c\/li\u003e\n\u003cli\u003eIncludes full hydraulic wet end components: volute, impeller, suction cover, wear ring, and necessary seals.\u003c\/li\u003e\n\u003cli\u003e2\" suction and 2\" discharge MBT (male bolt-thread) port sizing for spa or small pool systems.\u003c\/li\u003e\n\u003cli\u003eSide-discharge design with optional 90° rotation to adapt plumbing layout.\u003c\/li\u003e\n\u003cli\u003eAllows rebuild of existing pump motor base and plumbing, reducing cost compared to full pump replacement.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: 91041825-000\u003c\/li\u003e\n\u003cli\u003eFrame Size: 48-Frame motor mounting\u003c\/li\u003e\n\u003cli\u003eRated Horsepower: 2.5 HP continuous duty\u003c\/li\u003e\n\u003cli\u003eSuction \u0026amp; Discharge Ports: 2″ MBT suction and discharge threads\u003c\/li\u003e\n\u003cli\u003eIncluded Components: Volute housing, impeller, suction cover, wear ring, O-rings, drain plug with seal, screws\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications \u0026amp; Compatibility\u003c\/h3\u003e\n\u003cp\u003eThis wet end assembly fits Gecko\/Aqua-Flo Flo-Master XP2 and XP2E pump models and is suitable for systems originally built with a 2.5 HP 48-frame motor and 2″ ports. It enables upgrading or restoring pump performance by replacing the hydraulic section while retaining the motor and base plumbing.\u003c\/p\u003e\n\u003ch3\u003eInstallation Instructions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eShut off electrical power to the pump and isolate water plumbing.\u003c\/li\u003e\n\u003cli\u003eDrain the pump housing, remove the existing wet end components from the motor base.\u003c\/li\u003e\n\u003cli\u003eClean the motor shaft sleeve and shaft journal, remove old shaft seal and inspect for wear.\u003c\/li\u003e\n\u003cli\u003eInstall the new wet end assembly: mount volute, install wear ring, set impeller to correct depth, attach suction cover and hardware, install O-rings and tighten screws evenly.\u003c\/li\u003e\n\u003cli\u003eRealign plumbing unions or connectors, refill system, restore circulation and verify no leaks and correct flow rating.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTroubleshooting\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePump loses prime:\u003c\/strong\u003e Check impeller depth, verify suction cover o-ring seal and ensure no air ingress at pump lid.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow flow or motor over-current:\u003c\/strong\u003e Confirm impeller size, wear ring gap, and correct motor matching for 2.5 HP load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeaks at discharge flange:\u003c\/strong\u003e Inspect volute mounting bolts, check gasket and ensure drain plug is tight.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMaintenance Tip\u003c\/h3\u003e\n\u003cp\u003eCheck and clean the impeller and suction cover when servicing the pump. Inspect the wear ring clearance annually and replace if wear becomes excessive. Replacing the wet end with the 91041825-000 kit can extend the life of your pump and avoid full pump replacement.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Gecko","offers":[{"title":"Default Title","offer_id":46797815382191,"sku":"ALI91041825000","price":89.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6415\/2239\/files\/gecko-aqua-flo-wet-end-for-25hp-flo-master-xp2e-pump-91041825-000-pump-parts-4703745.jpg?v=1777067690","url":"https:\/\/freshized.com\/products\/geckoaquaflowetendfor25hpflomasterxp2epump91041825000ali91041825000","provider":"Freshized","version":"1.0","type":"link"}