Fowler WM-803 48″ Pool Coping Strips
Part Number: WM-803
Description
A 48-inch long plastic strip designed to hold the overlap liner securely on above-ground round pools while the stabilizer rail and top rail are re-installed. Made of non-corrosive material for long-term exposure.
Compatibility & Fitment
- Fits round above-ground pools where the liner overlaps the pool wall and is held by the stabilizer/top rail.
- Used in place of standard coping after removing the stabilizer rail to re-install the top rail or liner.
- Specifically 48″ in length—suitable for large-format panel replacement or segment installation on round pools.
Features & Specifications
- Length: 48″ (4 feet).
- Material: durable plastic, engineered to resist corrosion from pool chemicals and UV exposure.
- Designed for ease of installation and replacement in above-ground pool liner/coping systems.
Installation Notes
Remove the stabilizer and top rail per manufacturer instructions. Position the WM-803 strip at the liner overlap, align evenly with the wall and top rail seat. Slide or clip the strip securely into the stabilizer-rail channel, then reinstall the top rail. Ensure liner remains properly seated and tensioned before refilling or returning to service.
Maintenance Tip
Inspect annually during liner replacement or major service. If the strip is cracked, warped, or allows liner movement, replace the unit immediately. A properly installed coping strip helps maintain liner stability and prevents liner lip damage or shifting under swimmer loads.
