CMP 25594-150-000 Spa Master 2.5″ Fiberglass Jet Assembly
Part Number: 25594-150-000
Description
This genuine CMP Jet Body Assembly is designed for 2.5″ pipe applications in fiberglass spa systems. It features a socket-style water inlet at 1½″ and an air inlet at 1″, providing a robust jet configuration for spa hydrotherapy use.
Compatibility & Fitment
- Fits spa systems using 2.5″ fiberglass body jets with a 1½″ water inlet and 1″ air inlet.
- Designed for the CMP Spa Master series of jets where higher flow and air-mix design is required.
- Used as a replacement when original jet body is cracked, leaking, worn or obsolete.
Features & Specifications
- Water inlet: 1½″ socket connection.
- Air inlet: 1″ socket connection.
- Body size: 2.5″ nominal fiberglass body compatible with spa plumbing.
- Material: Injection molded/fiberglass composite construction engineered for spa chemical environments.
- Finish: White (unless otherwise specified) — suitable for integration in most spa shell interiors.
Installation Notes
Prior to installation, shut off pump and isolate spa plumbing. Remove the existing jet body and clean the pipe socket and surrounding wall area. Use appropriate bonding/adhesive or solvent cement suitable for the material of the spa plumbing. Socket the jet body into the 2.5″‐fitting, align and level the faceplate flush with the spa wall. Allow cure time per adhesive instructions before restoring circulation and adding back heater and air systems. Start the spa and verify jet function and sealing.
Maintenance Tip
Inspect the jet body annually for signs of cracking, pitting, or loosened seating around the wall. If you notice air leaks, degraded mixing of air/water, or shell damage, replace the jet body with the 25594-150-000 to restore optimal performance and prevent further spa wall damage.
