{"product_id":"apos-certified-vmv-a1-pro-gallium-nitride-power-amp","title":"VMV A1 PRO Gallium Nitride Power Amp (Apos Certified)","description":"\u003ch1\u003e\n \u003cstrong\u003eA new kind of power amp\u003c\/strong\u003e\u003cbr\u003e\n \u003c\/h1\u003e\n \u003cp\u003eThe VMV A1 PRO is a compact high-power amplifier that uses gallium nitride (GaN) transistors—an alternative to silicon that switches faster, runs cooler, and wastes less energy. That means less distortion, tighter transients, and a more compact form factor that doesn’t need a giant heatsink to keep its cool. Whether you’re driving full-size stereo speakers or bi-amping in mono mode, the A1 PRO delivers ultra-clean power.\u003cbr\u003e\u003c\/p\u003e\n \u003ch2\u003e\n \u003cstrong\u003eGallium nitride inside\u003c\/strong\u003e\u003cbr\u003e\n \u003c\/h2\u003e\n \u003cp\u003eGallium nitride (GaN) is one of the biggest improvements to power amplification in decades. Unlike traditional silicon transistors, GaN devices can switch at much higher frequencies—up to 1MHz in the case of the A1 PRO. That ultra-fast switching drastically reduces \"dead time,\" the micro-moments when both output transistors are briefly off. Less dead time means less distortion, especially in high-frequency content where timing errors tend to smear detail and sap clarity.\u003cbr\u003e\u003c\/p\u003e\n \u003ch2\u003e\n \u003cstrong\u003eMono mode for extra muscle\u003c\/strong\u003e\u003cbr\u003e\n \u003c\/h2\u003e\n \u003cp\u003eWant more power? Switch it into mono mode. With a pair of A1 PROs, you can quadruple the power output and take on more demanding speaker loads. Mono mode gives you up to 400W into 4Ω—enough headroom to power floorstanding speakers with ease. \u003cbr\u003e\u003c\/p\u003e\n \u003ch2\u003e\n \u003cstrong\u003ePrecise volume control \u003c\/strong\u003e\u003cbr\u003e\n \u003c\/h2\u003e\n \u003cp\u003eThe PGA2311 is a digitally-controlled analog volume chip from Texas Instruments that offers precise control and ultra-low distortion. If you’ve ever dealt with volume drift, channel imbalance, or noise at low levels, you’ll appreciate what it brings to the table.\u003cbr\u003e\u003c\/p\u003e\n \u003ch2\u003e\n \u003cstrong\u003eSafeguards built in\u003c\/strong\u003e\u003cbr\u003e\n \u003c\/h2\u003e\n \u003cp\u003eThe A1 PRO comes with full-protection circuitry against overheating, overcurrent, and more. You probably won’t trigger them, but it’s good peace of mind, especially if you're running a high-efficiency rig in mono mode.\u003cbr\u003e\u003c\/p\u003e\n \u003ch2\u003e\n \u003cstrong\u003eClean power from a dedicated supply\u003c\/strong\u003e\u003cbr\u003e\n \u003c\/h2\u003e\n \u003cp\u003eThe power supply is an audio-grade, high-power switching unit built to match the amp’s dynamic demands. It stays quiet under load and uses just 0.5W in standby, so you can leave it in your rack without worrying about power draw.\u003cbr\u003e\u003c\/p\u003e\n \u003ch2\u003e\n \u003cstrong\u003eBalanced and unbalanced inputs\u003c\/strong\u003e\u003cbr\u003e\n \u003c\/h2\u003e\n \u003cp\u003eXLR and RCA inputs let you run the A1 PRO in stereo or mono BTL mode, and gold-plated binding posts keep your speaker connections secure. Channel separation hits 75dB—great performance for a unit in this class.\u003cbr\u003e\u003c\/p\u003e\n \u003ch2\u003e\n \u003cstrong\u003eBenchmark-grade performance\u003c\/strong\u003e\u003cbr\u003e\n \u003c\/h2\u003e\n \u003cp\u003eWith a dynamic range up to 111dB and SNR of 109dB, the A1 PRO punches far above what you might expect from a compact Class D amp. And with a THD+N of just 0.003%, it stays clean at low volumes and doesn’t smear transients when things get loud.\u003cbr\u003e\u003c\/p\u003e\n \u003ch3\u003e\n \u003cstrong\u003eProduct highlights\u003c\/strong\u003e\u003cbr\u003e\n \u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003eGaN FETs for higher switching speeds and lower distortion\u003c\/li\u003e\n \u003cli\u003eUltra-low THD+N (0.003%)\u003cbr\u003e\n \u003c\/li\u003e\n \u003cli\u003e160W ×2 @ 4Ω in stereo, 400W ×1 @ 4Ω in mono\u003cbr\u003e\n \u003c\/li\u003e\n \u003cli\u003eTI PGA2311 advanced volume chip\u003cbr\u003e\n \u003c\/li\u003e\n \u003cli\u003eStereo and mono modes with balanced\/unbalanced inputs\u003cbr\u003e\n \u003c\/li\u003e\n \u003cli\u003eAudiophile-grade power supply\u003cbr\u003e\n \u003c\/li\u003e\n \u003cli\u003eOverheat, overcurrent, and short circuit protection\u003cbr\u003e\n \u003c\/li\u003e\n \u003cli\u003eDynamic range: 111dB (Ch1), 111dB (Ch2)\u003cbr\u003e\n \u003c\/li\u003e\n \u003cli\u003eSignal-to-noise ratio: 109dB (Ch1), 110dB (Ch2)\u003cbr\u003e\n \u003c\/li\u003e\n \u003cli\u003eGold-plated RCA\/XLR inputs and speaker terminals\u003cbr\u003e\n \u003c\/li\u003e\n \u003c\/ul\u003e\n \u003ch3\u003e\n \u003cstrong\u003eSpecs\u003c\/strong\u003e\u003cbr\u003e\n \u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003eInputs: RCA \/ XLR (Mono)\u003cbr\u003e\n \u003c\/li\u003e\n \u003cli\u003eTHD+N: 0.003%\u003cbr\u003e\n \u003c\/li\u003e\n \u003cli\u003eSNR: 109dB\u003cbr\u003e\n \u003c\/li\u003e\n \u003cli\u003eChannel separation: 75dB\u003cbr\u003e\n \u003c\/li\u003e\n \u003cli\u003eInput sensitivity:\u003cbr\u003e\n \u003cul\u003e\n \u003cli\u003eStereo: 680mV \/ 22kΩ\u003cbr\u003e\n \u003c\/li\u003e\n \u003cli\u003eMono: 2100mV \/ 22kΩ\u003cbr\u003e\n \u003c\/li\u003e\n \u003c\/ul\u003e\n \u003c\/li\u003e\n \u003cli\u003eOutput power:\u003cbr\u003e\n \u003cul\u003e\n \u003cli\u003eStereo: 160W ×2 @ 4Ω, 85W ×2 @ 8Ω\u003cbr\u003e\n \u003c\/li\u003e\n \u003cli\u003eMono: 400W ×1 @ 4Ω, 250W ×1 @ 8Ω\u003cbr\u003e\n \u003c\/li\u003e\n \u003c\/ul\u003e\n \u003c\/li\u003e\n \u003cli\u003eStandby power: \u0026lt; 0.5W\u003cbr\u003e\n \u003c\/li\u003e\n \u003cli\u003ePower consumption: 40W (normal volume)\u003cbr\u003e\n \u003c\/li\u003e\n \u003cli\u003eDimensions: 8.27\" × 1.87\" × 7.94\" (210 × 47.6 × 201.6 mm)\u003cbr\u003e\n \u003c\/li\u003e\n \u003cli\u003eWeight: 3.44lbs (1.56kg)\u003cbr\u003e\n \u003c\/li\u003e\n \u003c\/ul\u003e\n \u003ch3\u003e\n \u003cstrong\u003eWhat’s included\u003c\/strong\u003e\u003cbr\u003e\n \u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003eVMV A1 PRO Gallium Nitride Power Amplifier\u003cbr\u003e\n \u003c\/li\u003e\n \u003cli\u003eAC power cable\u003cbr\u003e\n \u003c\/li\u003e\n \u003cli\u003eUser manual\u003cbr\u003e\n \u003c\/li\u003e\n \u003cli\u003eRemote control\u003cbr\u003e\n \u003c\/li\u003e\n \u003c\/ul\u003e","brand":"VMV","offers":[{"title":"Open Box - Like New","offer_id":46866217730223,"sku":"APS-AC-1028-1-LN","price":395.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6415\/2239\/files\/apos-audio-vmv-speaker-amp-vmv-a1-pro-gallium-nitride-power-amp-apos-certified-open-box-like-new-1198163237.png?v=1777716317","url":"https:\/\/freshized.com\/products\/apos-certified-vmv-a1-pro-gallium-nitride-power-amp","provider":"Freshized","version":"1.0","type":"link"}