Pentair In-Floor (A&A) Low Profile & Top Feed 1.5" Glue-In T-Valve Assembly | 230052 / 540200
The Pentair In-Floor (A&A) 230052 / 540200 is a glue-in T-valve assembly designed for use in 1.5" in-floor pool cleaning and circulation systems. This part includes the internal T-valve and retaining clip that direct water flow through the valve body, allowing your in-floor system to switch zones effectively.
Key Features
- Complete glue-in 1.5" T-valve assembly with clip included
- Compatible with both low profile and top feed in-floor valve housings
- Direct replacement for worn or damaged T-valve internals
- Designed for reliable zone routing and efficient water distribution
- Durable materials suited to pool conditions
Compatibility
- Fits 1.5" in-floor cleaning system valve bodies using a glued (solvent weld) connection
- Works with both low profile and top feed Pentair/A&A valve configurations
Fitment Tip: Confirm plumbing size (1.5" glued connection) and that your valve body accepts a glue-in T-valve before installation. This assembly replaces only the internal T-valve and clip, not the entire valve housing.
What’s Included
- 1 × Glue-in T-valve
- 1 × Retaining clip
Installation Notes
- Turn off pump and relieve pressure in the system.
- Clean valve body cavity and dry-fit the assembly to ensure correct orientation.
- Apply PVC primer and solvent cement to both the valve and pipe.
- Insert the assembly into plumbing and ensure the retaining clip is seated correctly.
- Allow glue to fully cure before pressurizing and returning system to service.
Maintenance Tips
- Check the T-valve periodically for wear or binding.
- Inspect and replace the valve O-ring if it shows signs of cracking or flattening.
- Use pool-safe silicone lubricant on O-rings during routine service.
